Free Consultation* Imported Interior Materials
soundproofing foam
soundproof ceilings
fabric wall panels
acoustic consultants
foam sound proofing
AcoustiSeal™ (Professional Series) Acoustical Sealant
Interior designing

Model #AS-29

  • Exceeds LEED™ Building Requirements
  • Low VOC
  • Low Odor
  • Non Toxic
  • Cost Effective
  • Essential for High STC Walls/Floors
  • Convenient Large Size Tubes
  • Acoustically Effective
  • Remains Soft and Flexible When Dry
  • Bonds to Wood, Concrete, Glass, Gypsum, Metal and Plastic
  • Paintable
  • Dispenses Easily
  • Easy Cleanup With Soap and Water
  • Stops Noise From Leaking Through Joints and Edges
  • Will Not Crack
  • When Used Properly, AcoustiSeal™ Drastically Increases the Overall STC of Floor, Ceiling and Wall Assemblies

Greenguard Logo

Feature Benefits
Ultra Low VOC content GREENGUARD approved and meets LEED requirements.
Water-based Adhesive Non-Flammable, Environmentally Friendly.
Bonds to Most Building Materials Provides a strong, durable bond to multiple surfaces; Bonds well to wet, frozen and treated lumber.
Gap Filling Will bridge minor gaps when bonding irregular surfaces; Helps reduce squeaks and sound transmission.
Easy Cleanup with Water (Uncured Adhesive) Eliminates the use of harsh cleaning chemicals.
Low Odor Great Indoor Projects – No Strong Solvent Odor

Tools Typically Required:
Utility knife, caulking gun and tool to puncture inner seal of cartridge.

Safety Precautions:
Wear gloves.

The temperature of the adhesive, the surfaces and the working area must be above 40°F (4°C) and below 100°F (38°C). For best performance, apply adhesive at 70°F (21°C). Ensure surfaces to be bonded are clean, dry, structurally sound and free of dust, grease, oil, snow, ice, standing water or other contaminants. To increase adhesion, sand glossy surfaces to a dull finish. Pre-fit all materials prior to applying product. Cut off tip of cartridge at a 45° angle to desired bead size. Puncture inside seal of cartridge.

Storage and Disposal Damaged by Freezing:
Store in a cool, dry location at room temperature. Take unwanted product to an approved household hazardous waste transfer facility. Hardened material may be disposed of with trash.

The information and recommendations contained herein are based on our research and are believed to be accurate, but no warranty, express or implied, is made or should be inferred. Purchasers should test the products to determine acceptable quality and suitability for their own intended use. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or recommendation to practice any invention covered by any patent, without authority from the owner of the patent.

CAUTION! CONTAINS ETHYLENE GLYCOL AND CRYSTALLINE SILICA. Avoid eye contact. Do not take internally. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.